Aspire Veynom LXEX Replacement Pod 5ml (1-Pack)

Aspire Veynom LX/EX Replacement Pod

Without Coil, Empty Tank, 5ml, 1 pcs/Pack

No reviews yet. Be the first. Write a review

$5.99Free U.S. shipping $60+ ($100+ CA)

The Aspire Veynom Replacement Pod holds 5mL, fills from the top and ships without a coil, so you fit a BP coil of your choice.

Compatible with: Aspire BP coils from 0.17 to 1.0 ohm: 0.17 ohm at 45 to 55 watts, 0.3 ohm at 30 to 40, 0.4 ohm at 25 to 35 and 0.6 ohm at 15 to 25.

Devices: the Aspire Veynom LX, Veynom EX and Veynom Air. The Veynom LX kit is out of stock at the moment. Other in-stock BP hosts: the Huracan Mini tank and the BP80 pod.

Not sure which device or strength? Take the quiz to find your match, under two minutes

Type

Clear

Need help choosing?Take the 2-minute Vape Quiz

Fast dispatch · 1 business day
Free U.S. shipping $60+ ($100+ CA)

Description
Additional information

Description

The Veynom Replacement Pod is supplied empty so you can fit the BP coil resistance that suits your draw. Here’s why this pod is an essential addition to your vaping kit:

Aspire Veynom EX/LX Replacement Pods Features:

Capacity: 5mL
Fill System: Threaded Top Fill
Material: PCTG
Coil Support: BP Mesh Coils
Coil Installation: Press Fit
Pod Connection: Magnetic

Package Contents:

Aspire Veynom Replacement Pod (5.0 ml capacity)
User Manual

Note: Ensure to properly prime each coil and pod before use for the best vaping experience.

Additional information

Weight	.5 oz
Dimensions	3 × 3 × 1 in
Type	Without Coil, Empty Tank, 5ml, 1 pcs/Pack

FAQ's

No. It ships without one so you can choose the resistance. It takes any Aspire BP coil from 0.17 to 1.0 ohm.

5mL, filled from the top.

Aspire lists the BP range: 0.17 ohm at 45 to 55 watts, 0.3 ohm at 30 to 40 watts, 0.4 ohm at 25 to 35 watts, 0.6 ohm at 15 to 25 watts and 1.0 ohm at 10 to 16 watts.

Aspire lists the Veynom LX, Veynom EX and Veynom Air. The Veynom LX kit is out of stock at the moment.

Yes. The BP coil platform is shared across the Veynom pod, the BP 80 pod, the BP Stik pod and the Huracan tanks, so one coil pack can serve several devices.

One.

Open the top-fill cap and fill slowly to just below the maximum. With a new coil, put two or three drops directly on the cotton first, then let the filled pod stand five to ten minutes before the first draw.

If the coil is built into the pod, the pod is the consumable: most people get one to two weeks before the flavour drops off. If the pod takes a separate coil, the pod itself lasts much longer and you just change the coil. Sweetened e-liquids shorten coil life considerably; unsweetened tobacco blends are far gentler.

Usually overfilling, filling without letting air escape, or a large temperature or pressure change. Fill to just below the maximum, leave a small air gap, wipe the contacts before seating the pod, and store it upright. A hairline crack in the pod body will also weep, and that is not fixable.

Match it to the coil. A 70/30 for the sub-ohm resistances from 0.17 to 0.4 ohm, and a 50/50 for the 0.6 and 1.0 ohm.