Aspire BP80 Pod Replacement Pod (4.6ml)

No reviews yet. Be the first. Write a review

$10.99Free U.S. shipping $60+ ($100+ CA)

The Aspire BP80 Replacement Pod holds 4.6mL, refills from the top and takes any BP coil, so a worn coil does not mean a new pod.

Compatible with: Aspire BP coils from 0.17 to 1.0 ohm. Coils sold separately.

Devices: the Aspire BP 80 pod mod, which is out of stock at the moment. Other BP hosts we stock: the Huracan Mini tank and the Veynom pod.

Not sure which device or strength? Take the quiz to find your match, under two minutes

Size

Clear

Need help choosing?Take the 2-minute Vape Quiz

Aspire BP80 Pod Replacement Pod (4.6ml)

Add Coils

Aspire BP Replacement Coils (5pcs/pack)

Aspire BP Replacement Coils 0.3Ω (5-Pack)

Aspire BP Replacement Coils (5pcs/pack)

Resistance

Clear

$11.99Free U.S. shipping $60+ ($100+ CA)

Fast dispatch · 1 business day
Free U.S. shipping $60+ ($100+ CA)

Description
Additional information

Description

Introducing the Aspire BP80 Replacement Vape Pods, meticulously crafted to complement your Aspire BP80 Pod Mod Kit.

Which coils and pods fit? See our Aspire coil compatibility chart for Nautilus, BVC, BP, Atlantis and more, and the tanks and pods Aspire lists for each one.

Features:

Compatibility: Tailored for the BP80 Pod Mod.
Pod Capacity: Generous 4.6ml for extended vaping sessions.
Filling Mechanism: Easy-to-use silicone stoppered bottom filling system.
Coil Compatibility: Supports the entire Aspire BP Coil Series (coils sold separately).
Coil Installation: Hassle-free press-fit coil installation.
Connection: Secure magnetic pod connection.

What’s Included:

1 x Aspire BP80 Replacement Vape Pod

Additional information

Weight	2 oz
Dimensions	3 × 3 × 1 in
Size	4.6ml

FAQ's

No. It takes any Aspire BP coil from 0.17 to 1.0 ohm, and those are sold separately.

4.6mL, filled from the top.

Aspire lists the full BP range for this pod: 0.17 ohm at 45 to 55 watts, 0.3 ohm at 30 to 40 watts, 0.4 ohm at 25 to 35 watts, 0.6 ohm at 15 to 25 watts and 1.0 ohm at 10 to 16 watts.

The Aspire BP 80 pod mod. That kit is out of stock at the moment, so this is a spare for a device you already own.

Yes, that is the point of the BP platform. The same coils feed the BP Stik Pod, the Veynom Pod and the Huracan tanks, so one coil pack covers several devices.

Lift the top-fill cap, fill slowly to just below the maximum, and close it. Prime a new coil with a few drops on the cotton first, then let the filled pod stand five to ten minutes.

If the coil is built into the pod, the pod is the consumable: most people get one to two weeks before the flavour drops off. If the pod takes a separate coil, the pod itself lasts much longer and you just change the coil. Sweetened e-liquids shorten coil life considerably; unsweetened tobacco blends are far gentler.

Usually overfilling, filling without letting air escape, or a large temperature or pressure change. Fill to just below the maximum, leave a small air gap, wipe the contacts before seating the pod, and store it upright. A hairline crack in the pod body will also weep, and that is not fixable.

For the sub-ohm coils, 0.17 to 0.4 ohm, a 70/30 feeds the mesh properly. For the 0.6 and 1.0 ohm a 50/50 wicks better.

Probably not. A fresh coil often needs a fill or two to open up, and if it was fired before the cotton was fully wet you may have partly scorched it. Let a filled pod stand for five to ten minutes before the first draw, and take the first few puffs gently.