Aspire Flexus Blok Replacement Pod, No Coil

Aspire Flexus Blok Replacement Pod (Without Coil)

No reviews yet. Be the first. Write a review

$5.99Free U.S. shipping $60+ ($100+ CA)

Aspire Flexus Blok Replacement Pod is built for the Flexus Blok and ships without a coil. It takes the Aspire AF coil series, so add your AF coils separately.

Compatible with: the Flexus Blok, and takes Aspire AF coils.

Not for the other Flexus devices: the AIO, Q, and Stik each use their own pod (AIO, Q, Stik), though all Flexus pods share the same AF coils.

Not sure which device or strength? Take the quiz to find your match, under two minutes

Aspire Flexus Blok Replacement Pod (Without Coil)

Add Coils

Aspire AF Mesh Coil (5-Pack)

Aspire AF Mesh Coil (5-Pack)

Resistance

Clear

$14.99Free U.S. shipping $60+ ($100+ CA)

Description

The Aspire Flexus Blok Replacement Pod is the spare pod for the Aspire Flexus Blok. It holds 3mL, fills from the side, and ships without a coil, so you fit an Aspire AF mesh coil of your choice.

Features:

Built for the Flexus Blok: It does not fit the Flexus AIO, Q or Stik, which each use their own pod.
High-Quality Materials: Ensures durability and longevity.
Easy Refill System: Convenient side-fill design makes refilling a breeze.
Leak-Proof Design: Say goodbye to messy leaks and spills.
Consistent Flavor: Designed for optimal e-liquid absorption, delivering consistent flavor with every puff.
Takes AF Coils: Accepts the Aspire AF mesh coil series, 0.6ohm at 15-18W and 1.0ohm at 12-15W. Coil sold separately.

What’s in the Box:

1 x Aspire Flexus Blok Replacement Pod

Additional information

Weight	2 oz
Dimensions	3 × 3 × 1 in
Type	Aspire Flexus Blok Replacement Pod

FAQ's

No. It is supplied without one, so you fit an Aspire AF coil separately.

3mL, filled from the side.

The Aspire AF coil series: 0.6 ohm at 15 to 18 watts or 1.0 ohm at 12 to 15 watts.

The Aspire Flexus Blok, which we stock as a complete kit.

No. Each of those uses its own pod. The AF coils are shared across the Flexus range, but the pods are device-specific.

One.

Open the side fill plug and fill slowly to just below the maximum so air can escape. Prime a new coil with a few drops on the cotton, then let the filled pod stand five to ten minutes.

With the coil built in, the pod is the consumable: one to two weeks is typical. Sweetened e-liquids caramelise on the coil and shorten that; unsweetened tobacco blends are far gentler.

Usually overfilling, filling without letting air escape, or a change in temperature or pressure. Fill to just below the maximum, leave a small air gap, wipe the contacts before seating the pod, and store it upright.

Probably not. A fresh coil often needs a fill or two to open up, and firing it before the cotton is wet can partly scorch it. Let it stand five to ten minutes after filling and take the first puffs gently.