Aspire Minican 3 Pod

Without coil, 3mL, 1-Pack

No reviews yet. Be the first. Write a review

$5.99Free U.S. shipping $60+ ($100+ CA)

The Aspire Minican 3 Pod holds 3mL and takes a replaceable 0.8 ohm Minican coil, so you change the coil rather than the whole pod.

Compatible with: the Minican 0.8 ohm mesh coil, rated 13 to 15 watts by Aspire. Devices: the Minican 3 Pro, plus the Minican Lite, Minican 4+, Minican 4, Minican 2, Minican+ and Minican 3.

If you would rather swap the pod whole, the Minican Pod has the coil built in. Best with a 50/50 tobacco such as Special Blend.

Not sure which device or strength? Take the quiz to find your match, under two minutes

Size

Clear

Need help choosing?Take the 2-minute Vape Quiz

Add Extra Pod

Aspire Minican 3 Pod

Add Coils

Aspire Minican Mesh Coil (0.8Ω)(5-Pack)

Resistance

Clear

$9.99Free U.S. shipping $60+ ($100+ CA)

Fast dispatch · 1 business day
Free U.S. shipping $60+ ($100+ CA)

Description
Additional information

Description

The Aspire Minican 3 Pod is a 3mL refillable pod that takes a replaceable 0.8 ohm Minican coil. This pod boasts a generous 3ml e-liquid capacity, ensuring longer vaping sessions without frequent refills. Its user-friendly design and compatibility with the Minican 3 Pod make it a must-have for every vaper.

Which coils and pods fit? See our Aspire coil compatibility chart for Nautilus, BVC, BP, Atlantis and more, and the tanks and pods Aspire lists for each one.

Features:

Generous Capacity: A 3ml e-liquid capacity allows for extended vaping sessions.
Leak-Proof Design: Engineered to prevent e-liquid leakage, ensuring a mess-free experience.
Easy Refill Mechanism: Features a simple and convenient filling system.
High-Quality Materials: Crafted with premium materials for durability and longevity.
Compatibility: Perfectly fits the Minican 3 Pod.

What’s in the Box:

1 x Aspire Minican 3 Pod (3ml, without coil)

Additional information

Weight	2.14 oz
Dimensions	5 × 2.85 × 1.85 in
Size	3.0ml

FAQ's

No. It takes a replaceable 0.8 ohm Minican mesh coil, which Aspire rates at 13 to 15 watts, and that is sold separately.

3mL.

Aspire lists the Minican Lite, Minican 4+, Minican 4, Minican 2, Minican+, Minican, Minican 3 and Minican 3 Pro. The Minican 3 Pro is the one we currently stock.

This one takes a separate replaceable coil, so you change a cheap coil and keep the pod. The Minican Pod has the coil built in, so you replace the whole pod each time. Both fit the same devices; it is a question of which running cost you prefer.

One.

Open the fill port on the side, insert the nozzle, and fill slowly to just below the maximum so air can escape. Let a newly coiled pod stand five to ten minutes before the first draw.

If the coil is built into the pod, the pod is the consumable: most people get one to two weeks before the flavour drops off. If the pod takes a separate coil, the pod itself lasts much longer and you just change the coil. Sweetened e-liquids shorten coil life considerably; unsweetened tobacco blends are far gentler.

Usually overfilling, filling without letting air escape, or a large temperature or pressure change. Fill to just below the maximum, leave a small air gap, wipe the contacts before seating the pod, and store it upright. A hairline crack in the pod body will also weep, and that is not fixable.

Probably not. A fresh coil often needs a fill or two to open up, and if it was fired before the cotton was fully wet you may have partly scorched it. Let a filled pod stand for five to ten minutes before the first draw, and take the first few puffs gently.

A 50/50 VG/PG blend at a mouth-to-lung draw. At 13 to 15 watts the 0.8 ohm coil pairs well with salt nicotine or a higher-strength freebase.