Aspire Minican Pod

0.8Ω Coil, 3ml, 2-Pack

No reviews yet. Be the first. Write a review

$6.99Free U.S. shipping $60+ ($100+ CA)

The Aspire Minican Pod holds 3mL and has a 0.8 ohm coil built in, two to a pack. There is no separate coil to buy or fit. When the flavour fades you replace the whole pod.

Compatible with: the Minican 3 Pro, plus the Aspire Minican Lite, Minican 4+, Minican 4, Minican 3, Minican 2, Minican+ and the original Minican.

If you would rather replace just the coil, use the Minican 3 Pod with a Minican 0.8 ohm mesh coil instead.

Not sure which device or strength? Take the quiz to find your match, under two minutes

Type

Clear

Need help choosing?Take the 2-minute Vape Quiz

Fast dispatch · 1 business day
Free U.S. shipping $60+ ($100+ CA)

Description
Additional information

Description

The Aspire Minican Pod is a compact 3mL pod with a 0.8 ohm coil built in. This pod is not just about its sleek design; it’s about the technology and features that make it stand out.

Which coils and pods fit? See our Aspire coil compatibility chart for Nautilus, BVC, BP, Atlantis and more, and the tanks and pods Aspire lists for each one.

Features:

Pod Capacity: 3mL
Construction: PCTG
Fill-System: Bottom Fill
Coil Support: Minican Coils
Coil Resistance: 0.8ohm Mesh
Coil Installation: Press-Fit
Pod Connection: Magnetic

What’s in the box:

1 x Aspire Minican Pod
1 x User Manual
1 x Warranty Card

Additional information

Weight	.5 oz
Dimensions	5 × 2.85 × 1.85 in
Type	0.8Ω Coil, 3ml, 2-Pack

FAQ's

No. The coil is built into the pod, so there is nothing to fit. When the flavour drops off you change the whole pod.

0.8 ohm.

3mL per pod, two pods per pack.

Aspire lists the Minican Lite, Minican 4+, Minican 4, Minican 2, Minican+, Minican, Minican 3 and Minican 3 Pro. The Minican 3 Pro is the one we currently stock.

The Minican 3 Pod takes a separate replaceable coil; this one has the coil built in. Integrated pods are simpler and there is no coil to prime, but the running cost per pod is higher because you throw the coil away with it.

Open the fill port, fill slowly to just below the maximum so air can escape, then let it stand five to ten minutes before the first draw so the cotton wets through.

If the coil is built into the pod, the pod is the consumable: most people get one to two weeks before the flavour drops off. If the pod takes a separate coil, the pod itself lasts much longer and you just change the coil. Sweetened e-liquids shorten coil life considerably; unsweetened tobacco blends are far gentler.

Usually overfilling, filling without letting air escape, or a large temperature or pressure change. Fill to just below the maximum, leave a small air gap, wipe the contacts before seating the pod, and store it upright. A hairline crack in the pod body will also weep, and that is not fixable.

Probably not. A fresh coil often needs a fill or two to open up, and if it was fired before the cotton was fully wet you may have partly scorched it. Let a filled pod stand for five to ten minutes before the first draw, and take the first few puffs gently.

A 50/50 VG/PG at a mouth-to-lung draw. A 0.8 ohm coil runs cool enough for salt nicotine or a higher-strength freebase.