Skip to content

WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Find your perfect vape matchA few quick questions, under two minutes.
Take the Vape Quiz
Filters

Replacement Pods, Coils And Vape Accessories

  • Aspire OBY Pods 1.2Ω (3-Pack)
    4.66(119)

    Aspire OBY Pods (1.2Ω, 3-pack)

    Attention: The Aspire OBY Pods have been discontinued. For an upgraded experience, try the Aspire Nexi Pro Replacement Pods, a much better, more advanced replacement.

    Aspire OBY Pods are designed for the OBY device, featuring an integrated mesh coil and an easy bottom-fill system. Experience enhanced flavor and a leak-proof design.

    Compatible with: Aspire OBY Pod System

    $10.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Cloudflask III 0.17Ω Mesh Coil (3-Pack)

    Aspire Cloudflask III Mesh Coils (0.17Ω , 3-pack)

    Explore the Aspire Cloudflask 3 Replacement Coils, offering a 0.17ohm resistance for robust flavor and vapor production.

    Compatible Products: Aspire Cloudflask 3 Pod System, Cloudflask S

    $13.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok TFV18 Replacement 0.15Ω Coils (3-Pack)

    Smok TFV18 Replacement Coils (3-Pack)

    Experience the power of SMOK TFV18 Coils. Crafted for flavor, vapor, and longevity. Engineered for peak performance with the SMOK TFV18 tank.

    Compatible with: TFV16 Tank, TFV18 Tank, Mag P3 Kit, Mag-18 Kit, Morph 2 Kit, Arcfox Kit

    $14.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire TSX Pod 0.8Ω (3.0 mL, 2-Pack)
    5.00(3)

    Aspire TSX Pod (3.0 mL, 2-Pack)

    0.8Ω, 3.0ml

    Aspire TSX Pods come two to a pack with a 3mL capacity and the coil built in, so a pod swap is also a fresh coil. Available in 0.8 ohm and 1.0 ohm.

    Compatible with: the Aspire Cyber X and Cyber S. Both devices are out of stock at the moment, so these are spares for a device you already own.

    Not the same as the TG Pod: the Cyber G takes the TG Pod instead. Best with a 50/50 tobacco at mouth to lung, such as Special Blend or Virginia.

    $8.99 Select options This product has multiple variants. The options may be chosen on the product page
  • GeekVape B Series (Boost) Replacement Coils 1.2Ω (5-Pack)
    5.00(4)

    GeekVape B Series Replacement Coils (5-Pack)

    Version 2 (Boost Version) Also Available

    Geekvape B Series (Boost) Replacement Coils come in a 5-pack, with standard, Boost Version, and Boost Version V2 options in 0.2Ω, 0.3Ω, 0.4Ω, and 0.6Ω. Choose resistance by the wattage you vape at.

    Fits: the Geekvape Aegis Hero, Hero 2, and Boost 2 pods (Hero, Hero 2, B60 Boost 2).

    Not for the Aegis Boost Pro: the Boost Pro and Boost Pro 2 take P Series coils instead.

    Price range: $11.99 through $14.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok Novo Pod 1.0Ω (Clear Meshed 3mL 3-Pack)
    4.60(10)

    Smok Novo Replacement Pods

    3-pack, 2mL & 3mL

    SMOK Novo Replacement Pods in a 3-pack, with 2mL and 3mL capacities across mesh, ceramic, and Clear Meshed coil options from 0.6 ohm to 1.5 ohm. On the Novo platform the pod is the coil, so a pod swap is also a fresh coil. Each drop-down option states its capacity and fill style.

    Compatible with: Novo Pro Pod System, Propod GT Kit, Novo 2 Kit, Novo 2C Kit, Novo 2S Kit, Novo 2X Kit, Novo 3 Kit, Propod Kit

    Not for the Novo 4, 5, or 6: the Novo 4 uses its own Novo 4 Pods, and the Novo 5 Meshed Pods fit both the Novo 5 and the Novo 6.

    Price range: $11.99 through $12.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok Novo Pod M Replacement Pods 1.0Ω
    5.00(6)

    SMOK Novo Pod M Replacement Pods

    3mL, 3-Pack, Top Fill

    SMOK Novo Pod M Replacement Pods have a 2mL capacity and a leakproof top-fill system, available in 0.6Ω, 0.8Ω, and 1.0Ω resistances. On this platform the pod is the coil, so a pod swap is also a fresh coil.

    Compatible with: Novo GT Box Kit, Novo GT, the original Novo, Novo 2, and Novo 2X devices.

    Not for the Novo 4, 5, or 6: the Novo 4 uses Novo 4 Pods, and the Novo 5 and 6 use the Novo 5 Meshed Pods.

    $13.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Geekvape M Replacement Coils 0.2Ω (5-Pack)
    5.00(2)

    Geekvape M Replacement Coils

    5-Pack, M Series Replacement Coils

    Shop Geek Vape M Coils (5-Pack), featuring a large expansive coil designed to produce great flavors from a variety of coil configurations.

    Compatible with: Geekvape Z Max Tank.

    Price range: $15.99 through $21.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok Novo X Replacement Pods 2mL 0.8Ω (3-Pack)
    5.00(2)

    Smok Novo X Replacements Pods (3-Pack)

    Explore the SMOK NOVO X Replacement Pods (3-Pack), featuring a 2mL refillable capacity and an integrated 0.8ohm DC MTL Coil for a satisfying vaping experience.

    Compatible with: Novo X Kit

    $11.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Flexus AIO Pod 4.0mL (1-Pack)

    Aspire Flexus AIO Pod

    4mL, Empty Pod Cartridge, 1-Pack

    Aspire Flexus AIO Replacement Pod is built for the Flexus AIO, tuned for a clean fit and steady flavor. It takes the Aspire AF coil series, so add your AF coils separately. Fits: the Flexus AIO, and takes Aspire AF coils. Aspire also lists the AIO as compatible with the Flexus Stik pod. Not for the Flexus Blok or Q: those use their own pods (Blok, Q), though all Flexus pods share the same AF coils.

    $4.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok Novo 2 Replacements Pods lineup
    4.67(6)

    Smok Novo 2 Replacements Pods (2ml, 3-Pack)

    SMOK Novo 2 Replacement Pods come in a 3-pack with 2mL capacity and integrated coils, offered in 1.0Ω Mesh, 1.4Ω MTL, 0.9Ω Mesh, and 0.8Ω Mesh options. On the Novo platform the pod is the coil, so a pod swap is also a fresh coil.

    Compatible with: Novo 2, Novo 2C, Novo 3, and the original Novo, plus the Propod.

    Not for the Novo 4, 5, or 6: the Novo 4 uses its own Novo 4 Pods, and the Novo 5 Meshed Pods fit both the Novo 5 and Novo 6. The larger Novo X Pods are separate too.

    Price range: $9.99 through $10.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok Novo 2X Replacements Pods 2mL 0.9Ω (3-Pack)
    4.75(4)

    Smok Novo 2X Replacements Pods (3pcs/Pack)

    SMOK Novo 2X Replacement Pods come in a 3-pack with 2mL capacity and an integrated 0.9Ω Meshed MTL coil. On the Novo platform the pod is the coil, so a pod swap is also a fresh coil.

    Compatible with: Novo 2X, Novo 2, Novo 2C, Novo 3, and the original Novo, plus the Propod and Propod GT.

    Not for the Novo 4, 5, or 6: the Novo 4 uses its own Novo 4 Pods, and the Novo 5 Meshed Pods fit both the Novo 5 and Novo 6. The larger Novo X Pods are separate too.

    $11.99 Select options This product has multiple variants. The options may be chosen on the product page
  • GeekVape Wenax K1 Replacement Pods 0.8Ω (3-Pack)
    5.00(1)

    GeekVape Wenax K1 Replacement Pods (3-Pack)

    Experience premium vaping with the GeekVape Wenax K1 Replacement Pods. Designed exclusively for the Wenax K1, these pods guarantee flavor, vapor consistency, and durability.

    $11.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Flexus Stik Replacement Pod 3.0mL (1-Pack)
    5.00(1)

    Aspire Flexus Stik Replacement Pod (3.0 ml)

    Aspire Flexus Stik Replacement Pod carries a 3mL capacity and is built for the Flexus Stik. It takes the Aspire AF coil series, so add your AF coils separately. Compatible with: the Aspire Flexus Stik, and takes Aspire AF coils. Not for the Flexus AIO, Blok or Q: each of those uses its own pod (Blok, Q), though all Flexus pods share the same AF coils.

    $8.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Vilter Pod (2 pack) with White Filter
    5.00(1)

    Aspire Vilter Replacement Pod (2ml, 2-pack)

    Aspire Vilter Replacement Pods come in a 2-pack with a 2mL capacity, an integrated drip tip, and a leak-resistant design. The coil is built in, so a pod swap is also a fresh coil. Fits: the Aspire Vilter and the Vilter S, which Aspire confirms takes the original Vilter pod. Not for the Vilter Pro: it uses the Vilter Pro pod instead.

    $11.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok LP2 Replacement Coils DC 0.6Ω MTL (5-Pack)
    5.00(1)

    Smok LP2 Replacement Coils (5-Pack)

    SMOK LP2 Replacement Coils come in a 5-pack, with a 0.6Ω MTL coil and a 0.23Ω mesh DL coil for clean flavor and steady vapor. These are the LP2 series, not RPM coils.

    Compatible with: the Nord 50W, RPM 4, G-Priv Pod, G-Priv Pro Pod, and Morph Pod-80 kits (and their matching pods).

    Not for RPM-series pods: the RPM standard, RPM 2, RPM 3, and RPM 5 run RPM-series coils instead, so match the coil to your device.

    $13.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Vilter Paper Filter Drip Tip (10 pack)
    5.00(3)

    Aspire Vilter Paper Filter Drip Tip (10 pack)

    Aspire Vilter Paper Filter Drip Tips come ten to a pack. The paper filter sits between you and the pod, which softens the draw and cuts spit-back.

    Compatible with: the Aspire Vilter Pro and the wider Vilter series. The Vilter Pro pod uses the same mouthpiece fitting.

    Best with a 50/50 tobacco at mouth to lung, such as Special Blend.

    $6.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Flexus Q Replacement Pod 2mL (1-Pack)
    4.00(1)

    Aspire Flexus Q Replacement Pod (2ml)(1-pack)

    Aspire Flexus Q Replacement Pod is built for the Flexus Q, with a magnetic connection and a 2mL capacity. It ships without a coil and takes the Aspire AF coil series, so add your AF coils separately.

    Compatible with: the Flexus Q, and takes Aspire AF coils.

    Not for the other Flexus devices: the AIO, Blok, and Stik each use their own pod (AIO, Blok, Stik), though all Flexus pods share the same AF coils.

    $5.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Vilter Pro Pod with Drip Tip Replacement 2.0mL (2-Pack)
    4.50(2)

    Aspire Vilter Pro Pod 2ml (2-Pack)

    Aspire Vilter Pro Replacement Pods come in a 2-pack with a 2mL capacity and a non-replaceable 1.2 ohm meshed coil with side fill. The coil is built in, so a pod swap is also a fresh coil.

    Compatible with: the Aspire Vilter Pro only, per Aspire’s own pod list.

    Not for the original Vilter: that takes the separate Vilter pod, which is out of stock at the moment. Add paper filter drip tips for a softer draw, and pair with Special Blend.

    $8.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Smok Novo 3 Replacements Pods 2mL 0.8Ω (3-Pack)
    5.00(2)

    Smok Novo 3 Replacements Pods (Mesh 0.8Ω, 2mL, 3-Pack)

    SMOK Novo 3 Replacement Pods come in a 3-pack with 2mL capacity and an integrated 0.8Ω mesh coil. On the Novo platform the pod is the coil, so a pod swap is also a fresh coil.

    Compatible with: Novo 3, Novo 2, Novo 2C, and the original Novo, plus the Propod.

    Not for the Novo 4, 5, or 6: the Novo 4 uses its own Novo 4 Pods, and the Novo 5 Meshed Pods fit both the Novo 5 and Novo 6. The larger Novo X Pods are separate too.

    $11.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Aspire Flexus Blok Replacement Pod 2mL (1-Pack)

    Aspire Flexus Blok Replacement Pod (Without Coil)

    Aspire Flexus Blok Replacement Pod is built for the Flexus Blok and ships without a coil. It takes the Aspire AF coil series, so add your AF coils separately.

    Compatible with: the Flexus Blok, and takes Aspire AF coils.

    Not for the other Flexus devices: the AIO, Q, and Stik each use their own pod (AIO, Q, Stik), though all Flexus pods share the same AF coils.

    $5.99 Select options This product has multiple variants. The options may be chosen on the product page

The Replacement Pods, Coils And Accessories collection includes the critical parts that keep your open system devices performing at their best. Here you will find compatible pods, coils, glass, drip tips, and small accessories for popular pod kits, mods, and tanks. Regular replacement of pods and coils is essential for clean flavor, smooth draws, and consistent performance, and this category makes it easy to find the right parts for your device.

FAQ's

Pods and coils are the parts that come into direct contact with your e-liquid and heat it into vapor. Over time, cotton and metal degrade, flavor fades, and residue builds up. Replacing pods or coils regularly keeps your vape tasting clean, prevents burnt hits, and ensures your device works the way it was designed to. Without timely replacements, even the best device will feel harsh, weak, or inconsistent.

There is no single schedule that fits everyone, but common patterns are:

  • Light to moderate use with cleaner liquids: about 1 to 2 weeks per coil or pod
  • Heavy use or very sweet liquids: several days to about a week

If you notice burnt taste, muted flavor, or unusually dark e-liquid, it is time to change. Pods with built in coils are replaced as a whole. For systems with separate coils, you change only the coil and keep the pod or tank.

Each device is designed to work with specific pods or coil families. The easiest approach is to:

  • Check the exact name of your device or tank
  • Look for that name in the replacement product title or compatibility list
  • Match the coil resistance and intended style, such as MTL or sub ohm

If the listing mentions your device clearly, it is the right match. Avoid guessing, since incompatible coils can leak or fail to fit.

MTL coils are higher resistance and tuned for tight, cigarette like draws at lower wattage. They pair well with nic salts and medium to high strength freebase liquids. Sub ohm coils are lower than 1.0 ohm, run at higher wattage, and produce more vapor with a more open inhale. They match best with high VG and lower nicotine strengths. Choosing the right style ensures both comfort and coil life.

Yes, coil design has a big impact on flavor. Factors like resistance, mesh versus traditional wire, and wicking style all affect warmth, vapor density, and how flavor notes show up. Mesh coils often give smoother, more even vapor and clearer flavor. Higher resistance coils tend to emphasize throat hit and detail at lower wattage. It can be worth trying more than one coil type for your device to see which suits your favorite e-liquids best.

Several reasons contribute:

  • Very sweet or thick e-liquids leave more residue on cotton
  • Running coils at or above the top of their wattage range
  • Chain vaping without giving wicks time to resaturate
  • Not priming new coils before first use

Using reasonable power, priming properly, and letting coils rest briefly between long pulls can significantly extend their life.

Alongside pods and coils, you may find:

  • Replacement glass for tanks
  • Spare O-rings and seals
  • Drip tips
  • Charging cables or adapters where appropriate

These parts help you repair small issues like cracked glass or worn seals instead of buying an entirely new tank or kit.

Keep spare coils and pods in their original packaging until you need them. Store them in a cool, dry place away from direct sunlight and high humidity. Do not prefill pods and then leave them unused for months, since cotton can oversaturate and flavors can fade. When stored properly, sealed coils and pods will remain usable for a long time.

To prime a coil:

  • Add a few drops of e-liquid directly onto the visible cotton
  • Fill the tank or pod and assemble it
  • Let it sit for several minutes so the cotton becomes fully saturated
  • Take a few gentle primer pulls without firing if your device allows, then start at the low end of the recommended wattage

This simple step helps prevent dry hits and can significantly extend coil life.

0
    0
    Your Cart
    Your cart is empty.Shop Now